1746-MPM Allen Bradley

1746-MPM Allen Bradley

Is a Mold Pressure Module. It processes and extracts cyclic injection mold data for display on a PC, and responds to an alarm set by the user to monitor critical printing parameters.

Features:

• The user may then set an alarm limit on higher priority parameters to detect deviations when creating components.
• Additionally, this unit allows a user to set the critical mold pressure to transfer the injection process every engine cycle.
• Designed for use with SLC 5/03 (or later) processors.
• Programmed to interact with injection molding machines.
• has two independent channels to receive analog pressure input from the sensor or from the SLC processor in the backplane.
• Operating temperature -25 and 60 degrees Celsius (-13 to 140 degrees Fahrenheit);
• Minimum nonoperating temperature is -40 degrees Fahrenheit, its maximum being 85 degrees Celsius. (-40 to 185 degrees Fahrenheit).
• The relative humidity of this module ranges from 5% to 95% without condensation.

Specifications:

• Manufacturer Rockwell Automation
• Brand Allen-Bradley
• Part Number/Catalog No. 1746-MPM
• Series SLC 500
• Module Type Mold Pressure Module
• Voltage Range 10-30 Volts DC Source
• Inputs 8
• Backplane Current (5 Volts DC) 50 milliamps
• Signal delay 8 milliseconds
• Off State Current 1 milliamps
• Applications General Purpose DC Inputs
• Applications Combination 120 Volts AC I/O