CBV-108FP ITOH DENKI Circuit board presentation

• Fastener hardware – 2 cross-head screws M4 x 15 – 2 spring washers M4 – 2 nuts M4 • 1 Connector M8 5 Pins • 1 Connector M8 4 Pins

Motorized roller series compatible : PM500VE, PM605VE

The circuit board CBV-108 must be associated with only one motor : 1 Power Moller ® 24 brushless = 1 CBV-108 The CBV-108 circuit board is not compatible with motorized roller equipped with mechanical brake.

Power supply TBTS 24V DC ± 10% – ripple < 10% Protection 7A Input current without motorized roller 0.03A Input power without motorized roller 1,5W Start current limitation 4,4 A Motor start time after start signal (RUN / STOP) < 15 ms Protection index IP65 Protection Integrated fuse of 7A Against polarity reversal 24V and 0V Thermal protection (95°C for circuit board and 105°C for the motor) Against induced overvoltage Initialisation time Circuit board 24 V power supply 0.5s Environment From 0 to 40 °C Less than 90% relative humidity (without condensation) Neither corrosive nor explosive atmosphere Vibrations < 0,5 G