GIMATIC MPBM1640 Self-centring angular electric gripper

GIMATIC MPBM1640 Self-centring angular electric gripper

Description

Gimatic electric grippers are designed to be used in place of traditional pneumatic components were compressed air circuits could be a liability, also they operate in an on/off manner receiving their signal directly from a control panel. Basically there is no programming needed or intermediary control device.

An added benefit is the energy savings realized because the motor is only used to actuate the device. The actuator position is maintained by mechanical means when an object is gripped and motor cut off.

A microprocessor and all electronics are integrated into the gripper so that no other external controller is necessary. The microprocessor operates the motor and turns it off with no programming required. Built in motor drive manufactured.

Self-centring angular electric gripper, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.93 Hz at 30°C, IP54, with bushings

Features:

• TORQUE (Ncm) 68
• STROKE ° 2×23°
• UOM NR
• Weight [Gr] 140
• SELF-CENTERING JAW SYSTEM
• 6 in-lbf TOTAL GRIPPING FORCE