1746-N2 Allen-Bradley Slot Filler
$0.00
Allen Bradley 1746-N2 is a slot filler that includes an unused I/O slot in the chassis; it prevents a defect in the backplane by helping to keep debris from falling into the slot. This product also protects unused slots in the chassis from dust. After being tested by applying the security requirements EN 61131-2 Programmable Controllers, Part 2 – Equipment Requirements and Testing, the 1746-N2 is ensured to meet Directive 73/23/EEC of the Low Voltage Directive Board. The Allen Bradley 1746-N2 is suitable for use in Class I, Division 2, Group A, B, C, D, and non-hazardous locations only. Before installing or removing a module, take care to disconnect from the SLC 500 system and from other sources to the module (in other words, do not “hot swap” any module), and disconnect all devices connected to the module. Failure to heed precautions may result in the destruction of equipment.
The Allen Bradley 1746-N2 has dimensions of 12.7 x 7.62 x 20.32 centimeters (5 x 3 x 8 inches). The weight of this slot filler is approximately 0.045 kilograms. Its operating temperature goes from -25 to 60 degrees Celsius (-13 to 140 degrees Fahrenheit), while its nonoperating temperatures go from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The relative humidity of this slot filler fluctuates between 5% and 95% without condensation. Its operating vibration is 2 g at 10 to 500 Hz and it’s operating and nonoperating shock is 30 g.
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 1746-N2 |
| Series | SLC 500 |
| Hardware Type | Slot Filler |
| Voltage Range | 10-30 Volts DC Source |
| Inputs | 8 |
| Backplane Current (5 Volts DC) | 50 milliamps |
| Signal delay | 8 milliseconds |
| Off State Current | 1 milliamps |
| Applications | General Purpose DC Inputs |
| Applications | Combination 120 Volts AC I/O |
| UPC | 10662073537677 |
Detalles
1746-N2 Allen Bradley Slot Filler
Is a slot filler that includes an unused I/O slot in the chassis; it prevents a defect in the backplane by helping to keep debris from falling into the slot.
Security Note:
Before installing or removing, take care to disconnect from the SLC 500 system and from other sources to the module. Do not “hot swap” any module, and disconnect all devices connected to the module. Failure to heed precautions may result in the destruction of equipment.
Features:
- Protects unused slots in the chassis from dust. After being tested by applying the security requirements EN 61131-2 Programmable Controllers, Part 2 – Equipment Requirements and Testing.
- Ensured to meet Directive 73/23/EEC of the Low Voltage Directive Board.
- Suitable for use in Class I, Division 2, Group A, B, C, D, and non-hazardous locations only.
- Dimensions: 12.7 x 7.62 x 20.32 centimeters (5 x 3 x 8 inches).
- Weight is approximately to 0.045 kilograms.
- Operating temperature goes from -25 to 60 degrees Celsius (-13 to 140 degrees Fahrenheit)
- Nonoperating temperatures: -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).
- The relative humidity: 5% and 95% without condensation.
- Its operating vibration is 2 g at 10 to 500 Hz
Specifications:
- Manufacturer: Rockwell Automation
- Brand: Allen-Bradley
- Part Number/Catalog: No. 1746-N2
- Series: SLC 500
- Hardware Type: Slot Filler
- Voltage Range: 10-30 Volts DC Source
- Inputs: 8
- Backplane Current: (5 Volts DC) 50 milliamps
- Signal delay: 8 milliseconds
- Off State Current: 1 milliamps
- Applications: General Purpose DC Inputs
- Applications: Combination 120 Volts AC I/O
- UPC: 10662073537677
SI TE INTERESA ESTE COMPONENTE
Envíanos tus requeriemientos y nuestro equipo te dará una respuesta rápida.
ventas@mromasterpro.com
Directo desde tu teléfono móvil
Proporciona tus requeriemientos llenando la forma directamente.
