VPE1-GEN3-XDH Anver Self-Contained Electric Vacuum Stations
$0.00
ANVER’s VPE1-GEN3 Series Vac-Packs are suitable for handling non-porous to semi-porous loads. Designed for use with a wide assortment of vacuum pad attachments and lifter assemblies, these high quality Vac-Packs are ruggedly designed for heavy production use. Units are available with heavy duty frames or for mounting remotely.
Safety Features:
- Load Sensing Lifting Bail with Safety Lock-Out
Pendant controls are only active when the lifter and load are lowered completely to remove the risk of accidental release by the operator. (Not on the VPE1-GEN3-RD Series, which is a standalone version, or the VPE1-GEN3-TD, which is a tilter version.) Once on load, attach is almost instantaneous. - Vacuum Control
A solid-state Vacuum Control combines all the required vacuum generator controls in one rugged unit. This controls all vacuum pump functions, safety lights and is fitted with a standard audible vacuum leakage warning system. - Audible Vacuum Leakage Warning System
Integrated electronically controlled vacuum leakage sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when the vacuum level drops to a pre-determined set point. - Vacuum Retention
The system includes an internal check valve to stop leakage of vacuum in the event of a power failure (non-porous loads). A 627 cu. in. vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).
Additional Features:
- Front Control Panel and Gauges
All gauges, lights and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir. - Indicator Lights
Green light indicates “safe” vacuum level.
Red light indicates “unsafe” vacuum level.
White light indicates “power on.” - Ergonomic Control Handlebar
Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads. - 4 ft (1.2 m) Power Cord with Twistlock Plug and Receptacle
The twist-lock receptacles, both the male and female are supplied, which helps prevent accidental disconnection from the power source.
Maintenance:
- Bottom Hinged Front & Rear Panel Cover
The front and back covers fold open for easy access to all components. - Air Filter
Over-sized air filter provided inside of front cover features a screw-on clear filter bowl for easy filter inspection and cleaning.
Vacuum Pump:
Options:
|
Specifications with Standard Vacuum Pump:
Generator Series Model No. | VPE1-GEN3-FD | VPE1-GEN3-HD | VPE1-GEN3-XD | VPE1-GEN3-XDH |
Rated Load Capacity [lbs (kg)] | 2200 (998) | 4600 (2087) | 4600 (2087) | 4600 (2087) |
Unit Weight [lbs (kg)] | 182 (83) | 184 (84) | 190 (87) | 190 (87) |
A Max. Headroom [in. (mm)] | 25.19 (640) | 27.19 (691) | 28.19 (716) | 28.19 (716) |
B Handlebar Height [in. (mm)] | 12.00 (304) | 14.00 (356) | 15.00 (381) | 15.00 (381) |
C Handlebar Width [in. (mm)] | 18.00 (457) | 18.00 (457) | 18.00 (457) | 18.00 (457) |
D Handlebar Length Max. [in. (mm)] | 33.50 (851) | 33.50 (851) | 33.50 (851) | 33.50 (851) |
E Hardware Centers [in. (mm)] | 9.00 (229) | 12.00 (305) | 12.00 (305) | 12.00 (305) |
F FitsTube Size [in. (mm)] | 3 x 3 (76 x 76) | 3 x 6 (76 x 152) | 5 x 7 (127 x 178) | 5 x 7 (127 x 178) |
G Vac-Pack Depth [in. (mm)] | 7.31 (186) | 7.31 (186) | 7.31 (186) | 7.31 (186) |
Vacuum Level at Sea Level [in. Hg] | 24 | 24 | 24 | 24 |
Incoming Power Requirement [AC] | 115V/1PH/60Hz 15 Amps | 115V/1PH/60Hz 15 Amps | 115V/1PH/60Hz 15 Amps | 115V/1PH/60Hz 15 Amps |
Energy Saver / Quiet Automatic Shut-Off | YES | YES | YES | YES |
*NOTE: VPE1-GEN3-XDH-Series for use with beams longer that 231 inches with three sets of hardware. Not compatible with lift frames using center pads or crossarms.
Consult Anver for application requirements.
Specifications for Remote Mounting:
Unit Weight [lbs (kg)] | 144 (65) | 144 (65) |
A Max. Headroom [in. (mm)] | 20.00 (498) | 17.31 (440) |
B Unit Height [in. (mm)] | 16.59 (421) | 16.75 (425) |
C Unit Width [in. (mm)] | 14.80 (376) | 16.43 (372) |
D x E x J Hardware Mounting [in. (mm)] | 12 x 12 (305 x 305) M20X2.5 |
12 x 12 (305 x 305) M20X2.5 |
D x F x J Hardware Mounting [in. (mm)] | 12 x 8 (305 x 203) M20X2.5 |
12 x 8 (305 x 203) M20X2.5 |
D x G x K Hardware Mounting [in. (mm)] | 12 x 10 (305 x 254) M8X1.25 |
12 x 10 (305 x 254) M8X1.25 |
D x H x K Hardware Mounting [in. (mm)] | 12 x 6 (305 x 152) M8X1.25 |
12 x 6 (305 x 152) M8X1.25 |
Vacuum Level at Sea Level [in. Hg] | 24 | 24 |
Incoming Power Requirement [AC] | 115V/1PH/60Hz 15 Amps | 115V/1PH/60Hz 15 Amps |
Energy Saver / Quiet Automatic Shut-Off | YES | YES |
Detalles
SI TE INTERESA ESTE COMPONENTE
Envíanos tus requeriemientos y nuestro equipo te dará una respuesta rápida.
ventas@mromasterpro.com
Directo desde tu teléfono móvil
Proporciona tus requeriemientos llenando la forma directamente.